Tsubaki Cableveyor TKP35H22 Instruction Manual

1 Construction/
Nomenclature
2

Delivery

The Cableveyor is delivered in sections if its length exceeds the standard length (shown in number of links below).
The plastic travel and fixed end brackets, and the vertical/horizontal dividers, are normally shipped as unassembled parts.
TKP35H22 standard length (no. of links): 25 links
3

Connection

Normally arms are delivered with one side opened (not locked into the link).
3. Align the ends.
4

Disassembly

Point of
separation
3. Open the arms from
each link on either side
of the section to be
disassembled.
Tsubaki
Cableveyor
Caution: Always wear the appropriate protective gear (safety glasses, gloves, safety shoes,
etc.) when working.
Moving end
bracket
*The same guidelines apply to attaching links to the plastic travel/fixed end brackets.
2. Overlap the links, and
insert the pins into the
hole on one side.
*The same guidelines apply to attaching links to the plastic travel/fixed end brackets.
2. Insert
screwdriver into the gap
between links and twist
in the direction of the
arrow to remove the pin
from the hole.
TKP35H22
(Formerly TKP0350)
Arm
Horizontal
divider
Vertical
divider
Link
a flat-head
Instruction Manual
®
Fixed end
bracket
1. Push in the other side,
insert the pin,
connect.
1. Support the other pins
and bend
Cableveyor as shown to
separate the ends.
and
the