QUICK REFERENCE GUIDE - USE
Maxi Sky 1000
Lift from seated position
1
Place the sling around the patient,
with the base of the sling slightly
below the tail bone.
For sling with head support extend
to top of patient's head.
3
Place attachment loop on the
hook.
Loop sling
Make sure the safety latches are
closed and the sling strap is
completely inside the hook.
2
4
001-01392-EN Rev 0 • 06/2020 • Page 1/4
Pull each leg strap under the thigh so that it
emerges on the inside of the thigh.
Approach the patient with the lift.
Place the spreader bar in sitting position.
Place the spreader bar at or just below shoulder
level.
Place the spreader bar close enough to
be able to attach the shoulder straps.
Connect the sling loops to the spreader bar.
Attach shoulder straps then leg straps.
Raise the patient, proceed with the transfer.
Lower onto new location. When body
weight is fully supported detach loops.
Need help?
Do you have a question about the Maxi Sky 1000 and is the answer not in the manual?
Questions and answers