Table of Contents
Advertisement
Page 8
CK:199L Trojan
LITE
Noise Nuisance Recorder User Manual Guide
Getting started
It is recommended that you connect the sound level meter to the NoiseTools software
and check that the instrument is configured as required before deployment.
See Appendix 1 Configuring the sound level meter for noise nuisance measurements for
details of the configuration options that are specific to the Trojan
Noise Nuisance
LITE
Recorder.
Connecting the cables
The Trojan
is shipped with the cables connected so that it can be setup quickly and
LITE
easily.
The mains power supply and microphone cable can be disconnected from the case. This
allows the cables to be replaced if they become damaged.
Connecting the microphone & preamplifier
The microphone and preamplifier are stored inside the case next to the sound level
meter. Carefully remove the microphone & preamplifier from the case and connect to
the microphone extension cable.
Advertisement
Table of Contents
