Ending A Measurement; Packing Away The Instrument - Cirrus Research Trojan Lite User Manual

CK:199L Trojan LITE Noise Nuisance Recorder User Manual Guide Page 13

Ending a measurement

To end a measurement, open the case and press the Stop button on the instrument.
The measurement will be stopped and the data stored into memory.
If the instrument has been left unattended for more than 15 minutes with the case
closed, the display will be switched off to reduce power consumption.
Press any key on the instrument to activate the display and then press the Stop button.
The instrument will show the overall LAeq,t and LAFmax values for the measurement.
Press the Exit key to return to the main screen.

Packing away the instrument

Before packing the instrument away, switch off the instrument. Press and hold the
power button on the side of the sound level meter until the instrument has switched off.
Disconnect the mains power supply from the socket.
The microphone and preamplifier can be stored in the case along with the wireless
remote control units. This will protect the microphone from damage during transit and
storage.