Introduction - Cirrus Research Trojan Lite User Manual

CK:199L Trojan LITE Noise Nuisance Recorder User Manual Guide Page 5

Introduction

The Trojan is an advanced noise nuisance recorder that has been designed to be
LITE
simple to both setup and operate.
The system features a precision data logging sound level meter which records both the
noise levels and audio recordings over long periods of time.
Once the equipment is installed and setup, the user has no control over the operation of
the sound level meter which will measure and store noise levels for up to 30 days in a
single session.
The sound level meter is configured to store 24 hour blocks of measurement data,
repeating until either the memory is full or the instrument is switched off.
The only interaction needed by the user is to start and stop the audio recordings using
the standard wireless remote control or the optional wired remote control.
When the remote control is activated, the instrument will start to record audio and will
continue to do so until the stop button is pushed on the remote control.
If the user forgets to press stop, the instrument will end the audio recording after 5
minutes, whilst the measurement of noise levels continues.