Quick Start Guide - Cirrus Research Trojan Lite User Manual

CK:199L Trojan

Quick Start Guide

 Connect cables
Microphone Cable & Power Cable
o
 Connect Microphone & Preamplifier
Connect microphone & preamplifier to cable
o
Connect to tripod mount
o
 Plug in power supply
Switch on power supply
o
Check the clock on the Sound
o
 Calibrate sound level meter
Attach acoustic calibrator
o
Press Calibrate on sound level meter
o
Remove acoustic calibrator
o
Attach windshield
o
 Start measurement
Press start key on sound level meter
o
Use the remote control to start & stop audio recordings
o
 Stop measurement
Press the Stop key on the sound level meter
o
Press the Exit button on the sound level meter
o
 Switch off
Press and hold the power button
o
 Disconnect microphone & preamplifier
Remove windshield
o
Remove from tripod mount
o
Store in case
o
 Download the measurements
LITE Noise Nuisance Recorder User Manual Guide
Level Meter
Page 7
If not already connected
Take care!
Take care!
Adjust if needed
Switch on calibrator
Wait for calibration cycle
Take care!