Receiving Current; Sleep Current; Supply Voltage - Ebyte E70-915NW30S User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd

3.1.2 Receiving current

Product model
E70 (915NW30S)

3.1.3 Sleep current

Product model
E70 (915NW30S)

3.1.4 Supply voltage

Product model
E70 (915NW30S)
Chengdu Ebyte Electronic Technology Co.,Ltd
Copyright ©2012–2019，
Min Typ Max
12 13 14
Min Typ Max
1.0 2.0 3.5
Min Typ Max
3.3 5.0 5.2
Unit Remark
The current consumed by the RF chip in the

pure receiving state is called the receiving
current. Some RF chips with communication
protocols or developers have loaded some
self-developed
machine, which may cause the receiving
mA
current of the test to be too large；
The current in the purely receiving state is

often mA level, and the "receiving current" of
the μA level needs to be processed by the
developer through software;
Unit Remark
● Sleep current usually refers to the current consumed by
the CPU, RAM, clock and some registers reserved, and
the SoC is in a very low power consumption state;
µA
● Sleep current is often much smaller than the current
consumed by the power supply part of the machine at no
load, so it is not necessary to be too demanding.
Unit Remark
● The power supply voltage is at the maximum value for
a long time, and there is a risk of burning the module;
● The power supply pin has a certain anti-surge
V DC
capability, but it must not be processed without the
existence of pulses higher than the maximum supply
voltage;
E70-915NW30S User Manual
protocols on the whole
1-5