Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,Ltd
Example：AT+DMCFG=0
AT+RSCFG Setting/Querying the reboot parameter configuration
(reboot valid)
AT+RSCFG=?
11
AT+RSCFG=Value
Example：AT+RSCFG=0
Note: This parameter can be used for node disconnection detection. It is recommended to open it.
AT+UBCFG Setting /Querying the baud rate parameter (reboot valid)
AT+UBCFG=?
12
AT+UBCFG=Value
Example：AT+UBCFG=7
AT+UPCFG Setting /Querying the device parity parameter (reboot valid)
13
AT+UPCFG=?
Chengdu Ebyte Electronic Technology Co.,Ltd
Copyright ©2012–2019，
Value: dormant time, per unit second (S). 0~60 S.
Note: When configured as 0, the node will never wake up, that is, the node cannot receive
data but can upload data
Description:
Gets the reboot parameter configuration
Response：
RSCFG:0
Description:
Value：0 or 60~65535（S）
When the value less than 60s, the system judges 60, equals 0s, does not restart
Description：
Obtains the baud rate parameter
Response：
UBCFG:7
Description：
Value:0~7
0：1200
1：2400
2：4800
3：9600
4：19200
5：38400
6：57600
7：115200
Description
Gets the device parity parameter
Response：
UPCFG:0
E70-915NW30S User Manual
1-21
Advertisement
Table of Contents
