Vzh117; Compressor Mounting - Danfoss VZH Series Application Manuallines

Application guidelines
Composition of VZH117
tandem
240 Mini
Detail A

Compressor mounting

90
FRCC.PC.023.A7.22

VZH117

Tandem model
Variable speed
VZH117 + SH140
VZH117 + SH161
VZH117 + SH184
VZH117
152
Mini
The tandem is fixed on the frame using the
flexible grommets supplied with the compressor.
The compressors are fixed on the rails (not
included) using the rubber grommets,
mounting sleeves, washers (delivered with the
compressors).
HM 8 bolt
Lock washer
Flat washer
Steel mounting
sleeve
Rubber grommet
Nut
Base plate, rails, etc. with enough rigidity
Composition
Fixed speed
VZH117 SH140
VZH117 SH161
VZH117 SH184
SH140/161/184
7/8"
VZH117 + SH140/161/184
0.59 inch
Manifold compressors
7/8"
1"3/8
Oil equalisation
1"1/8
1"3/8
Because VZH117 are 0.28 inch smaller than SH
184 and in order to have the oil equalisation
connection at the same level for both
compressors, an additionnal 0.28 inch rigid
spacer must be added under the VZH117 feet
13
only for the composition of VZH117+SH184 (see
below drawing).
13
Rigid spacer
Fitting for VZH117 in tandem VZH117+SH184
Discharge left
1"3/8
Suction left
1"5/8
See detail A