Straightening Hair - Silvercrest SHGD 35D A1 Operating Instructions Manual

Straightening hair

1) Prepare the hair as described in "Before straightening".
2) Start with the lower sections of hair at the back of your head. Work around
the sides to the front:
Take a strand with a width of approximately 2 cm and hold its end tightly
between your index and middle finger of the hand that is not holding the
hair straightener.
WARNING! RISK OF INJURY!
► Ensure that the hotplates
touch the hotplates
appliance only on the handles. Risk of burns!
3) Clamp the strand near the root between the hotplates
together.
4) Pull the entire strand through the hotplates
quickly downwards from the root to the tips.
5) Proceed in the same way for every strand.
6) Once you have straightened all the strands, switch the appliance off and pull
the power plug from the mains power socket.
7) Allow the appliance to cool down completely.
Press the hotplates
■ 8 │
GB
do not touch your scalp. Risk of burns! Never
during operation! During operation, touch the
together and push the catch
and press them
by pulling the hair straightener
back in.
SHGD 35D A1