Straightening Hair - Silvercrest SHG 32 C1 Operating Instructions Manual

3) Press and hold down the ON/OFF switch
goes out when you are finished styling your hair.
Pull out the plug and allow the appliance to cool down completely.

Straightening hair

1) Prepare the hair as described in "Before straightening".
2) Start with the lower sections of hair at the back of your head. Work around
the sides to the front. Take a strand with a width of approximately 2 cm and
hold its end tightly between your index and middle finger of the hand that is
not holding the hair straightener.
WARNING! RISK OF INJURY!
► Ensure that the hotplates
operation, touch the appliance only on the handles. Risk of burns!
3) Clamp the strand near the root between the hotplates
together.
4) Pull the entire strand through the hotplates
quickly downwards from the root to the tips.
5) Proceed in the same way for every strand.
6) Once you have straightened all the strands, switch the appliance off and pull
the power plug from the mains power socket.
7) Allow the appliance to cool down completely.
8) Press the hotplates
SHG 32 C1
do not touch your scalp. Risk of burns! During
together and push the catch
until the indicator lamp
and press them
by pulling the hair straightener
back in .
GB │ IE │ NI │ CY │ 7 ■