Tools And Equipment; Consumables For Operation - Emerson Roxar User Manual

Preparation
June 2020
3.2

Tools and equipment

Table 3-1:
Description
Spanner
Adjustable spanner
Flathead
screwdriver
Hex key kit
Hex key bits and
compatible ratchet
Hex socket
Torque wrench
Brass or plastic
hammer
Retainer ring pliers
Pin hook wrench
Multipurpose
lubrication
Grease or lubricant
Note
Additional equipment may be required depending on facility requirements or the type of
fluid in process (for example, a container to discharge media, bucket, rags, and absorbent
pads).
3.3

Consumables for operation

This section describes key consumables available to perform retrieval operations.
Additional consumables may be required, depending on the device being used (for
example, coupons and insulators, probe and probe packing, o-rings for injection nuts, o-
rings for pressure proof covers). Check the user manual of the particular device for further
information.
For information on the consumables for maintenance, refer to Maintenance.
22
Size Quantity
⅛ in 1
Small & medium 2
1
2.5 mm to 10 mm Kit
6 mm to 10 mm Kit
19 mm 1
25 N m to 160 N m 1
1
1
6 mm tap 1
1
1
ROX000295904
Comments
Required during field operation for the
mechanical plug (hexagon)
Required during field operation for
adjusting the device (coupon holder,
probe or injection nut), pipe plug, and
coupon nut
Required for assembly coupons
Required for the assembly plug and
devices, assembly tool, and service valve
Required for the assembly tool and
service valve
Required for the assembly tool and
service valve
Required for the assembly tool and
service valve
Required during field operation
Required for assembly tool
Mechanical covers and retriever union
thread adapter
Multipurpose or marine lubricant
High-temperature grease or lubricant
www.Emerson.com/Roxar
User Manual