Advertisement
Quick Links
RTDTemp101A
RTD-Based Temperature
Data Logger
PRODUCT
USER GUIDE
To view the full MadgeTech product line,
visit our website at www.loggershop.co.uk
TABLE OF CONTENTS
2 Product Overview
2 Installation Guide
2 Wiring the Data Logger
3 Device Operation
4 Device Maintenance
4 Need Help?
Advertisement
Related Manuals for MadgeTech RTDTemp101A
Summary of Contents for MadgeTech RTDTemp101A
- Page 1 Data Logger PRODUCT TABLE OF CONTENTS USER GUIDE 2 Product Overview 2 Installation Guide To view the full MadgeTech product line, visit our website at www.loggershop.co.uk 2 Wiring the Data Logger 3 Device Operation 4 Device Maintenance 4 Need Help?
- Page 2 100 Ω, 2 or 4 wire RTD probes are recommended for the most accurate performance. Most 100 Ω, 3 wire RTD probes will work, but MadgeTech cannot guarantee the accuracy. To determine whether or not the 3-wire RTD probe will work, the resistance between the two same colored wires should be less than 1 Ω.
- Page 3 1. Select Alarm Settings from the Device Menu in the 1. Once the software is installed and running, plug the MadgeTech Software. A window will appear allowing to interface cable into the data logger. set the high and low alarms and warning alarms.
- Page 4 • Contact our friendly Customer Support Team at 01929 459 459 or support@wpls.co.uk MadgeTech 4 Software Support: • Refer to the built-in help section of the MadgeTech 4 Software. • Download the MadgeTech 4 Software Manual at madgetech.com. • Contact our friendly Customer Support Team at 01929 459 459 or support@wpls.co.uk...