Disk Files And Lotus 1-2-3 - Unitek MICROPULL IV MP4/115 Operation And Maintenance Manual

CHAPTER 3: OPERATING INSTRUCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Aver. Pull Strength:
Standard Deviation:
Standard Deviation:
Aver. - 3(Std Dev.):

Disk Files and LOTUS 1-2-3

1 The following procedure is used to import data into Lotus 1-2-3, assuming the disk file contains data
from a series of bonds made in the Non-Destruct or the Destruct Mode.
2 Load Lotus 1-2-3. Change the Default Directory to the MP4 Subdirectory using the /WGDD Command,
and use the /FR Command to retrieve the appropriate template file:
NONDEST.WK1 for Datalogs containing Non-Destruct Test Data
DESTRUCT.WK1 for Datalogs containing Destruct Test Data
The following example uses data collected from a series of bonds made using the Destruct Mode. The
data was saved in a file named DESTRUCT.PRN.
When the data appears on the screen, invoke the "Load Macro" by pressing <ALT> <L>. This macro
will erase the data portion of the template and will conclude with a list of the possible ".PRN" files
displayed on the command line. Move the cursor to the appropriate name, DESTRUCT in this case, and
press <Enter>. Save this file under whatever name is appropriate, using the /FS Command. Invoke the
"Calculate Macro" by pressing <ALT> <C>. Invoke the "Print Macro" by pressing <ALT> <P>.
3-22
12.3 gf
12.2 gf
12.0 gf
12.2 gf
13.2 gf
13.3 gf
13.5 gf
14.2 gf
13.0 gf
12.6 gf
12.5 gf
12.8 gf
13.1 gf
11.7 gf
11.5 gf
11.7 gf
Serial Number:
No. of Tests:
®
MICROPULL IV WIRE BOND PULL TESTER
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1015
16
12.6 gf
0.7 gf
5.8%
10.4 gf
990-180