Printed Reports - Unitek MICROPULL IV MP4/115 Operation And Maintenance Manual

11 If the "Echo Data to Disk File" field contains a "Y" all of the information received from the MP4 will be
reformatted into a Lotus 1-2-3 ".PRN" file. The Disk File named on the Change Header Screen will be
over-written whenever the Echo feature is selected.
12 If the "Increment Serial Number" Query was answered <N>, the request for a new serial number will be
made at the completion of each assembly in the following manner, where A-123456 represents the
previous serial number. The operator keys in the next serial number followed by <Enter>.
13 To exit this program, press <F9>. This closes all open files, enables the MP4 RS-232 port and restores
BASIC Default Legends to the bottom of the screen. Type SYSTEM <Enter>, to return to DOS.

Printed Reports

1 The format of the data generated when the MP4 is connected directly to a serial printer is:
2.5 gf
2.7 gf
2.7 gf
2.5 gf
2.6 gf
2.5 gf
1.2 gf
.0 gf
0.9 gf
2.5 gf
990-180
DESTRUCT TESTING
TEST PULL(gf)
16
Save Histogram Data to PULLS.TXT (Y/N) ? N
Erase Histogram Data from Memory (Y/N) ?
DESTRUCT TESTING
TEST PULL(gf)
16
Enter Next Serial No. A-123456
VALID TEST
VALID TEST
VALID TEST
VALID TEST
VALID TEST
VALID TEST
WIRE BROKE
NO TEST
FALSE ERROR 7
WIRE BROKE / HOLD TIME
®
MICROPULL IV WIRE BOND PULL TESTER
CHAPTER 3: OPERATING INSTRUCTIONS
11.7 gf
11.7 gf
25 mN
27 mN
27 mN
25 mN
26 mN
25 mN
25 mN
26 mN
25 mN
26 mN
VALID TEST
VALID TEST
VALID TEST
VALID TEST
VALID TEST
VALID TEST
VALID TEST
VALID TEST
VALID TEST
VALID TEST
3-19