Unitek MICROPULL IV MP4/115 Operation And Maintenance Manual page 3

Thank you for purchasing a Unitek Equipment Micropull® IV Wire Bond Pull Tester
Upon receipt of your equipment, please thoroughly inspect it for shipping damage prior to its
installation. Should there be any damage, please immediately contact the shipping company to file a
claim, and notify Unitek Equipment at:
The purpose of this manual is to supply operating and maintenance personnel with the information
needed to properly and safely operate and maintain the Micropull IV Wire Bond Pull Tester.
We have made every effort to ensure that the information in this manual is accurate and adequate.
Should questions arise, or if you have suggestions for improvement of this manual, please contact us at
the above location/numbers.
Unitek Miyachi Corporation is not responsible for any loss due to improper use of this product.
990-180
FOREWORD
1820 South Myrtle Avenue
P.O. Box 5033
Monrovia, CA 91017-7133
Telephone: (626) 303-5676
FAX: (626) 358-8048
e-mail: info@unitekequipment.com
®
MICROPULL IV WIRE BOND PULL TESTER
iii