Summary of Contents for Happybeds Pembroke 4 Drawer Chest
Page 1
Assembly Instructions Pembroke 4 Drawer Chest Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
Page 2
Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
Vendor: S000238 PARTS LIST HARDWARE LIST Part Item Part Item Top Panel Wooden dowel Right Panel 30mm Screw Left Panel 18mm Screw Front Side Column 60mm superb bar Back Side Column Front Cross Member Smooth shell pull Rear Cross Member Tack Slide 14mm Screw...
Page 4
Insert the hardware (A) in the parts shown. STEP 1: Vendor: S000238 Do NOT use any power tools are this may damage the frame and will invalidade any claim. Fix the right panel (2) and left panel (3) into the front side column (4) STEP 2: and back side column (5) using hardware (B).
Page 5
Insert the hardware (D) into the foot (15) and insert the foot (15) STEP 3: Vendor: S000238 into the assembled right panel (2) and left panel (3). Do NOT use any power tools are this may damage the frame and will invalidade any claim. Attach the front cross member (6) and rear cross member (7) into the assembled right panel (2) STEP 4: and left panel (3).
Page 6
STEP 5: Attach the assembled frame to the top panel (1) using hardware (B). Vendor: S000238 Do NOT use any power tools are this may damage the frame and will invalidade any claim. Attach the slide (8) into the side of furniture using hardaware (B). STEP 6: Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Page 7
Fix the back Panel (9) using hardware (F). STEP 7: Vendor: S000238 Do NOT use any power tools are this may damage the frame and will invalidade any claim. Fix the left side drawer (11) and the right side drawer (12) to the drawer front (10) using hardware (B). STEP 8: Insert the drawer bottom (14) between the left side drawer (11) and the right side drawer (12).
Page 8
The chest needs to be fixe to the wall. Step 9: Fix the wall strap (H) to the wall using washer (I) and screw (not provided). Insert wall strap through the hole in the back part of the furniture and fix onto the top panel using washer (I) and 14mm Screw (G).
Page 9
Insert the hardware (A) into the slides (8). STEP 10: Vendor: S000238 Do NOT use any power tools are this may damage the frame and will invalidade any claim. Step 11: Insert the drawers using hardware (A). Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Page 10
floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...