Automatic Preset Tuning - Yamaha RX-V992 Owner's Manual

AUTOMATIC PRESET TUNING

You can also make use of an automatic preset tuning function
for FM stations only. By this function, this unit performs automatic
tuning and stores FM stations with strong signals sequentially. Up
to 40 stations are stored automatically in the same way as in the
manual preset tuning method on page 50.
To store stations
1. Select the FM band.
Front panel
FM/AM
2. Press and hold the MEMORY button for about 3 seconds.
Front panel
MEMORY
MAN'L/AUTO FM
3. To tune to higher frequencies, press right side once.
To tune to lower frequencies, press left side once.
Front panel
DOWN TUNING UP
* If the TUNING button is not pressed, in a while, the automatic
preset tuning begins automatically toward higher frequencies.
currently displayed. Received stations are programmed to A1, A2
... A8 sequentially.
*
If you want to store the first station received by the automatic
preset tuning to a desired preset station number.
If, for example, you want to store the first received station to C5,
select "C5" by using the A/B/C/D/E switch and the preset station
number selector buttons after pressing the MEMORY button in
step 2. Then press the TUNING button. The first received station is
FM
stored to C5, and next stations to C6, C7 ... sequentially.
If stations are stored up to E8, the automatic preset tuning is
finished automatically.
When the automatic preset tuning is finished
The display shows the frequency of the last preset station.
PRESET
Check the contents and the number of preset stations by following
MEMORY the procedure of the section "To recall a preset station" on page
Flashes.
AUTO TUNING
50.
To recall a preset station
Simply follow the procedure of the section "To recall a preset
station" on page 50.
The automatic preset tuning begins from the frequency
If more than 8 stations are received, they are also
programmed to the preset station numbers on other groups (B,
C, D and E) in that order.
51