Short Cord Instructions - Kalorik CRM 43667 BK Manual

SHORT CORD INSTRUCTIONS

A short power supply cord is provided to reduce the hazards resulting
from becoming entangled in, or tripping over a longer cord. Extension
cords may be used if care is exercised in their use.
• The electrical rating of the extension cord should be at least that of
the appliance. If the electrical rating of the extension cord is too
low, it could overheat and burn.
• The resulting extended cord should be arranged so that it will not
drape over the countertop or tabletop where it can be pulled on by
children or tripped over.
PARTS DESCRIPTION
See page 2-3.
BEFORE THE FIRST USE
• Before using the appliance for the first time, remove and peel off all
promotional and packaging materials. Check that the cooking
plats is clean and free of dust.
• Clean the crepe and pancake maker (See "Cleaning and
Maintenance") and place the unit on a flat, dry, and heat-resistant
surface.
• It is recommended to heat the crepe and pancake maker for
about 10 minutes without any foodstuff on its surfaces. This helps to
eliminate any grease that may have adhered during
manufacturing and to eliminate the "new" appliance smell.
• Ventilate the room during this period. When your crepe and
pancake maker is heated for the first time, it may emit slight smoke
or odor. This is normal with many heating appliances. This does not
affect the safety of your appliance.
www.KALORIK.com
6
CRM 43667 – 200605