Denso BHT-1600 User Manual page 7

To system designers:
When introducing BHTs in those systems that could affect human lives, develop applications

carefully through redundancy and safety design which avoids the feasibility of affecting human
lives even if a data error occurs.
Handling the battery cartridge
Wrong handling of the battery cartridge may affect normal operation or result in a heat, smoke, or
scanner failure.
Be sure to observe the following.
Never put the battery cartridge in a microwave oven or high-pressure container.

Stop charging if the charging is not completed within the specified period of time.

Do not use different types of batteries nor mix new (unused) and old (used) batteries.

Handling the BHT
Wrong handling of the BHT may affect normal operation or result in vision disturbance. Be sure to
observe the following.
Never stare into the laser light.

Never point the code reading window at someone's eyes.

(Laser light emission window)
 Never disassemble or modify the BHT.
Do not insert any foreign materials into the battery cartridge.

Do not get the BHT wet or put it in water.

Never put the BHT in a microwave oven or high-pressure container.

Never put the BHT in places where there are excessively high temperatures, such as inside

closed-up automobiles, or in places exposed to direct sunlight.
Avoid using the BHT in extremely humid or dusty areas, or where there are drastic

temperature changes.
Stop using the BHT if its case is broken.

Do not use a battery cartridge or power source other than the specified one.

If the LCD screen is broken by mistake, care must be taken not to get the liquid crystal into

your eyes or mouth or drop it on your skin.
WARNING
Reading window
BHT-1600 Handy Terminal User Manual
vi