Denso BHT-1600 User Manual page 167

Transmit Check Digit
COMPOSITE
Composite CC-A/B
Composite CC-A/B
Composite CC-C
Composite CC-C
Composite TLC 39
Composite TLC 39
Composite General Preference
UPC Composite Mode
GS1-128 Emulation
Mode
GS1 DATABAR
GS1 DataBar-14
GS1 DataBar-14
Convert to UPC/EAN
Security Level
GS1 DataBar Limited
GS1 DataBar Limited
Convert to UPC/EAN
Security Level
GS1 DataBar Expanded
Decide whether to include the check digit in the data
being transmitted.
Switch to enable Composite CC-A/B decoding.
Switch to enable Composite CC-C decoding.
Switch to enable Composite TLC 39 decoding.
UPC barcodes can be "linked" with a 2D barcode during
transmission as if they were one barcode.
UPC Never Linked
Transmit UPC barcodes regardless of whether a 2D
barcode is detected.
UPC Always Linked
Transmit UPC barcodes and the 2D portion. If the 2D
portion is not detected, the UPC barcode will not be
transmitted.
 CC-A/B or CC-C must be enabled.
Auto-discriminate
Transmit UPC barcodes as well as the 2D portion if
present.
Sets GS1-128 emulation mode for UCC/EAN Composite
Codes.
Switch to enable GS1 DataBar-14 decoding.
Strips the leading '010' of GS1 DataBar and converts the
barcode to EAN-13.
A value that specifies the decode security level while
reading GS1 DataBar 14 from Level 0 to 3.
Switch to enable GS1 DataBar Limited decoding.
Strips the leading '010' of GS1 DataBar Limited and
converts the barcode to EAN-13.
There are setting options from Level 1 to 4.
BHT-1600 Handy Terminal User Manual
155
Disable
Enable
Enable
Disable
Auto-discrimi
nate
Disable
Enable
Enable
Disable
Level 1
Enable
Enable
Disable
Level 3
Enable