Table of Contents
Advertisement
APPENDIX II
2D IMAGER
The tables below list the symbology settings for 2D imager.
SYMBOLOGY SETTINGS
1D SYMBOLOGIES
Symbology
CODABAR
CodaBar
Codabar
Length option
CLSI Editing
NOTIS Editing
NOTIS Editing Type
Verify Check Digit
Switch to enable Codabar decoding.
Sets the length of the Codabar symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
When applied, the CLSI editing strips the start/stop
characters and inserts a space after the first, fifth, and
tenth characters of a 14-character Codabar barcode.
The 14-character barcode length does not include
start/stop characters.
Sets whether to include start/stop characters in the
transmitted data.
NOTIS Editing is to strip the start/stop characters, i.e.
to disable "Transmit Start/Stop Characters".
Options are None, ABCD/ABCD, abcd/abcd.
"NOTIS Editing" must be enabled.
Selects whether to verify the Modulo 43 check digit. If the
check digit is incorrect, the barcode will not be accepted.
Description
150
Default
Enable
Enable
Max
/
Min
Length
(4-55)
Disable
Disable
None
None
Advertisement
Table of Contents
