Clearing A Learned Function Or Macro - Yamaha RX-V3200 Owner's Manual

3
Press k / n to select the clear mode.
The mode is shown in the display window in the
following order:
(L: name of a component) Clears
all learned functions for the
component area. Press the input
selector button, Å or ı to select
the component.
Clears all learned functions for
this unit control area.
Clears all learned functions.
Clears all programmed macros.
Clears all renamed source
names in the display window.
Clears all programmed functions
including setup manufacturer
codes. This returns to the
factory settings.
4
Press and hold CLEAR again for about 3
seconds.
"C:OK" appears in the display window.
CLEAR
Note
• "C:NG" appears in the display window if the operation is
unsuccessful. In this case, start over from step 2.
5
Press CLEAR to exit from the clearing mode.
Once you have cleared a learned function or macro
for a button, the button reverts to the factory setting.
CLEAR
Note
• "ERROR" appears in the display window under the following
circumstances:
– when pressing a button other than the cursor and ENTER;
– when pressing more than one button at once; or
– when MACRO ON/OFF, 10KEY/DSP or PARAMETER/SET
MENU is switched to another position.
Clearing a Learned Function or
Macro
You can clear the function learned in a certain
programmable button in each area.
I To clear a learned function
1
Press an input selector button, Å or ı to
select the source component you want to
clear the function.
The selected component name appears in the display
window.
A
B
PHONO
V-AUX TUNER MD/TAPE CD-R CD
D-TV/LD CBL/SAT VCR 1 VCR2/DVR DVD
2
Press LEARN by using a ballpoint pen or
similar object.
"LEARN" and the selected component name appear
alternately in the display window.
LEARN
Note
• If you do not press any button within 30 seconds after step 2,
the clearing process is canceled. If this happens, start over from
step 2.
3
Press the button that you want to clear for 3
seconds as pressing CLEAR by using a
ballpoint pen or similar object.
"C:OK" appears in the display window.
CLEAR
4
Press LEARN again to exit
from the learning mode.
I To clear the macro function
1 Press an input selector button, Å or ı to
select the source component for which you
want to clear the function.
The selected component name appears in the display
window.
A B
PHONO
V-AUX TUNER MD/TAPE CD-R CD
VCR2/DVR DVD
D-TV/LD CBL/SAT VCR 1
REMOTE CONTROL FEATURES
LEARN
49