Connecting The Power Supply Cords - Yamaha RX-V3200 Owner's Manual

Connecting the Power Supply Cords

AC OUTLETS
SWITCHED
100W MAX. TOTAL
IMPEDANCE SELECTOR
SET BEFORE POWER ON
REAR : 4ΩMIN. /SPEAKER
REAR CENTER : 4ΩMIN. /SPEAKER
CENTER : 4ΩMIN. /SPEAKER
MAIN A OR B : 4ΩMIN. /SPEAKER
A B : + 8ΩMIN. /SPEAKER
REAR : 8ΩMIN. /SPEAKER
REAR CENTER : 8ΩMIN. /SPEAKER
CENTER : 8ΩMIN. /SPEAKER
MAIN A OR B : 8ΩMIN. /SPEAKER
(U.S.A. model)
VOLTAGE SELECTOR
VOLTAGE SELECTOR AC OUTLETS
240V
SWITCHED
100W MAX. TOTAL
IMPEDANCE SELECTOR
SET BEFORE POWER ON
REAR : 4ΩMIN. /SPEAKER
REAR CENTER : 4ΩMIN. /SPEAKER
CENTER : 4ΩMIN. /SPEAKER
MAIN A OR B : 4ΩMIN. /SPEAKER
+
A B : 8ΩMIN. /SPEAKER
REAR : 8ΩMIN. /SPEAKER
REAR CENTER : 8ΩMIN. /SPEAKER
CENTER :
8ΩMIN. /SPEAKER
MAIN A OR B : 8ΩMIN. /SPEAKER
(China and General models)
I Connecting the AC power cord
To AC outlet
[U.S.A. and Canada models]
Plug the power cord into the AC inlet when all
connections are complete, and then plug in this unit to the
wall outlet.
Caution
• Do not use other AC power cords than the one provided.
Otherwise it may result in causing fire or an electrical
shock.
[Australia, China and General models]
Plug in this unit to the wall outlet.
I AC OUTLETS (SWITCHED)
U.S.A., Canada, China and
General models ............................................ 3 OUTLETS
Australia model .............................................. 1 OUTLET
Use these outlets to connect the power cords from your
components to this unit. The power to the AC OUTLETS
is controlled by this unit's STANDBY/ON (or SYSTEM
POWER and STANDBY). These outlets will supply
power to any connected component whenever this unit is
turned on. The maximum power (total power
consumption of components) that can be connected to the
AC OUTLETS is 100 W for U.S.A., Canada and Australia
models and 50 W for China and General models.
I VOLTAGE SELECTOR
(China and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local main voltage BEFORE
plugging into the AC main supply. Voltages are 110/120/
220/240 V AC, 50/60 Hz.
CONNECTIONS
19