Speaker Mode Settings; Summary Of Speaker Set Items 1A Through 1F - Yamaha RX-V3200 Owner's Manual

This unit has 6 SPEAKER SET items on the SET MENU that you must set according to the number of speakers in your
configuration and their size. The following table summarizes these SPEAKER SET items, and shows the initial settings
as well as other possible settings.

Summary of SPEAKER SET Items 1A through 1F

Item
1A CENTER SP
1B MAIN SP
1C REAR L/R SP
1D REAR CT SP
1E LFE/BASS OUT
1F MAIN LEVEL
If the initial settings shown in the above table are not appropriate for your speaker configuration,
change settings following the steps described in "1 SPEAKER SET" from page 57 to 60.
22

SPEAKER MODE SETTINGS

Selects the output mode according to whether or not a center speaker is
being used and its performance.
Selects the output mode according to the performance of the main
speakers.
Selects the output mode according to whether or not rear L/R speakers
are being used and their performance.
Selects the output mode according to whether or not a rear center
speaker is being used and its performance.
Selects the speaker according to use for LFE signal output and low bass
signal.
Selects the main speaker level.
Description Control value (default
setting indicated in bold)
LRG/SML/NONE
LARGE/SMALL
LRG/SML/NONE
LRG/SML/NONE
SWFR/MAIN/BOTH
Normal/–10 dB