Changing The Source Name In The Display Window; Clearing A Learned Function Or Macro - Yamaha RX-V1000 Owner's Manual

4
Press MACRO again when
the operation sequence
you want to program is
complete.
Note
• "ERROR" appears in the display window under the following
circumstances:
– when pressing more than one button at once; or
– when MACRO ON/OFF is switched to another position.
Memory back-up
If the remote control is without batteries for more than
3 minutes, or if exhausted batteries remain in the
remote control, the contents of the memory may be
cleared. When the memory is cleared, insert new
batteries, set up the manufacturer code and program
any acquired functions that may have been cleared.
Changing the Source Name in the
Display Window
1
Press an input selector button, A or B to
select the source component you want to
rename.
The selected component name appears in the display
window.
SYSTEM
POWER STANDBY PHONO
V-AUX TUNER MD/TAPE CD-R CD
D-TV/LD CBL/SAT VCR 1 VCR 2/DVR DVD
2
Press RE-NAME by using
a ballpoint pen or similar
object.
3
Press k / n to select and enter a character.
Pressing n changes the character in the following
order: A to Z, a to z, 0 to 9, space, - (hyphen).
(Pressing k goes in the reverse order.)
6CH INPUT
TITLE
ENTER
SOURCE
DISPLAY MENU SOUND
SELECT SEARCH – CHAPTER
POWER REC STOP PAUSE PLAY
/
MACRO
RE-NAME
+
4
Press l / h to move the cursor to the next
position.
TITLE
SOURCE
DISPLAY MENU
SELECT SEARCH
POWER REC STOP
/
y
• If you continuously want to rename another source component,
press ENTER and repeat steps 1, 3 and 4.
5
Press RE-NAME again to exit from the
renaming mode.
RE-NAME
Clearing a Learned Function or
Macro
1
Press an input selector button, A or B to
select the source component for which you
want to clear the function.
The selected component name appears in the display
window.
SYSTEM
POWER STANDBY PHONO
V-AUX TUNER MD/TAPE CD-R CD
D-TV/LD CBL/SAT VCR 1 VCR 2/DVR DVD
2
Press LEARN if you want to clear a learned
function, or press MACRO to clear a
programmed macro by using a ballpoint pen
or similar object.
LEARN
or
MACRO
Note
• If you do not press any button within 30 seconds during step 3,
the clearing process is canceled. If this happens, start over from
step 2.
REMOTE CONTROL FEATURES
6CH INPUT
ENTER
SOUND
– CHAPTER +
PAUSE PLAY
59