Clearing A Learned Function - Yamaha RX-V861 Owner's Manual

Remote control features

■ Clearing a learned function

You can clear the function learned for a certain button in
each control area.
Set the operation mode selector to L AMP or
1
L SOURCE and then press an input selector
button (B), or
containing the function you want to clear.
The selected component name appears in the display
window (J).
AMP
SOURCE
TV
or
AMP
SOURCE
TV
Press T LEARN using a ballpoint pen or
2
similar object.
"LEARN" and the selected component name
(ex. "DVD") appear alternately in the display window
( J ).
LEARN
Notes
• Do not press and hold T LEARN. If you hold it down for
more than 3 seconds, the remote control enters the remote
control code setting mode.
• If you do not complete each of the following steps within
30 seconds, the learning mode will be automatically
canceled. In this case, start over from step 2.
94
En
to select the input area
PHONO MULTI CH IN
V - AUX/DOCK
TUNER MD/CD-R
CD
DTV/CBL DVR VCR DVD
Press and hold T CLEAR using a ballpoint
3
pen or similar object and then press the
button you want to clear for about 3 seconds.
"C;OK" appears in the display window (J) if
clearing was successful. Once "C;OK" appears in the
display window (J) on the remote control, release
the ballpoint pen or similar object used to press
T CLEAR to exit the clearing mode. The remote
control returns to the learning mode.
MODE- PTY SEEK- START
LEARN CLEAR RENAME
y
• If you continuously want to clear another function, repeat
step 3.
• If you continuously want to clear another function for
another component, press J SELECT k / n to select the
input area, then repeat step 3.
• Once you clear a learned function, the button reverts to the
factory setting (or to the manufacturer setting if you have
set remote control codes).
Press T LEARN again to exit.
4
Notes
• "C;NG" appears in the display window (J) on the remote
control if clearing was unsuccessful. In this case, start over from
step 2.
• "ERROR" appears in the display window (J) on the remote
control if you press more than one button simultaneously.