Connecting The Power Cable; Turning On And Off This Unit - Yamaha HTR-5990 Owner's Manual

CONNECTIONS

Connecting the power cable

■ Connecting the AC power cable
Plug the supplied AC power cable into the AC inlet after
all other connections are complete, then plug the AC
power cable to an AC wall outlet.
CAUTION
Use the supplied AC cable. Do not use other AC power cables as
doing so may result in fire hazard or electrical shock.
AC IN
AC OUTLETS
100W MAX.TOTAL
SWITCHED
(U.S.A. model)
■ AC OUTLETS (SWITCHED)
Use these 2 outlets to supply power to any connected
components. Connect the AC power cables of your other
components to these 2 outlets. Power to these 2 outlets is
supplied when the main room, Zone 2 or Zone 3 is turned
on. However, power to these 2 outlets is cut off when the
main room, Zone 2 and Zone 3 are turned off or when
MASTER ON/OFF on the front panel is pressed and
released outward to the OFF position. The maximum
power or the total power consumption of the components
that can be connected to these 2 outlets is 100 W.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost. However, the stored data will be lost
in case the power cord is disconnected from the AC
wall outlet for more than one week.
28

Turning on and off this unit

When all connections are complete, turn on the power of
this unit.
1,4
MAIN ZONE
ZONE 2 ZONE 3
ON/OFF
ON/OFF ON/OFF
MASTER
PRESET/TUNING FM/AM A/B/C/D/E
ON :OFF
SEARCH MODE CATEGORY
EDIT
OPTIMIZER MIC
PROGRAM
PHONES SPEAKERS
A B PURE DIRECT STRAIGHT
EFFECT
SILENT CINEMA
2,3
1
Press MASTER ON/OFF on the front panel
inward to the ON position to turn on the
power of this unit.
• Only this unit is turned on.
• Zone 2 and Zone 3 are set to the standby mode.
ON
2
Press MAIN ZONE ON/OFF on the front panel
(or STANDBY on the remote control) to set
this unit to the standby mode.
ON/OFF
Front panel
(U.S.A. model)
VOLUME
l PRESET/TUNING/CH h
MEMORY TUNING MODE
DISPLAY
MAN'L/AUTO FM AUTO/MAN'L
INPUT
VIDEO AUX
TONE CONTROL AUDIO SELECT MULTI CH ZONE CONTROL
INPUT
S VIDEO VIDEO L AUDIO
MASTER
OFF
STANDBY
or
Remote control
R OPTICAL