Manual Setup; Basic Menu; Sound Menu; Input Menu - Yamaha HTR-5990 Owner's Manual

You can use the following parameters in SET MENU to manually adjust a variety of system settings and customize the
way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your
listening environment.
y
• You can run MANUAL SETUP using the system menu that appears in the OSD or in the front panel display. This manual uses the
OSD illustrations to explain the MANUAL SETUP procedure.

1 BASIC MENU

Use to manually adjust basic system parameters.
Item
A)SPEAKER SET
B)SP LEVEL
C)SP DISTANCE
D)THX SET
E)TEST TONE

2 SOUND MENU

Use to manually adjust speaker settings or compensate for video signal processing delays when using LCD monitors or
projectors. Most of the SOUND MENU parameters are set automatically when you run AUTO SETUP (see page 30).
y
Most of the parameters described in SOUND MENU are set automatically when you run AUTO SETUP (see page 30). You can use
SOUND MENU to make further adjustments, but we recommend running AUTO SETUP first.
Item
A)EQUALIZER
B)LFE LEVEL
C)DYNAMIC RANGE
D)AUDIO SET
E)HDMI SET

3 INPUT MENU

Use to manually reassign digital input and output, select the input mode, rename your input, or specify external input
settings.
Item
A)I/O ASSIGNMENT
B)INPUT RENAME
C)VOLUME TRIM
D)DECODER MODE
E)MULTI CH SET

MANUAL SETUP

Selects the size of each speaker, the speakers for low-frequency signal output and the cross over
frequency.
Adjusts the output level of each speaker.
Adjusts the delay time of each speaker.
Adjusts the THX settings.
Turns the test tone output on or off for the SPEAKER SET, SP LEVEL and
SP DISTANCE settings.
Adjusts the tonal quality of each speaker.
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
Adjusts the dynamic range of Dolby Digital or DTS signals.
Adjusts the overall audio settings for this unit.
Adjusts the HDMI support audio.
Assigns jacks according to the component to be used.
Changes the name of the input.
Adjusts the output volume of each jack.
Selects the input mode for the sources connected to the DIGITAL INPUT jacks on the rear panel of
this unit.
Adjusts the direction of the signals input into the center, subwoofer and surround channels when a
source component is connected to the MULTI CH INPUT jacks.
Features
Features
Features
MANUAL SETUP
Page
76
78
78
79
79
Page
79
80
80
80
80
Page
81
82
82
82
82
73