Yamaha HTR-5990 Owner's Manual page 88

MANUAL SETUP
HDMI interlace/progressive up-conversion
HDMI I/P
Use this feature to activate or deactivate the HDMI I/P up-
conversion of the analog video signals input at the
composite video, S-video and component video jacks so
that the analog video signals deinterlaced from 480i to
480p are output at the HDMI OUT jack.
Choices: ON, OFF
• Select ON to activate the HDMI I/P up-conversion of
the analog video signals.
• Select OFF to deactivate the HDMI I/P up-conversion
of the analog video signals.
Notes
• This menu item is not available and hence not visible in the
OSD if V CONV. is set to OFF.
• When the analog video signals with 1080i or 720p of resolution
are up-converted to HDMI and output at the HDMI OUT jack,
the picture quality may worsen.
■ Memory guard
B)MEMORY GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices: ON, OFF
B)MEMORY GUARD
[ON
[<]/[>]:Adjust
• Select ON to protect the following system parameters.
– DSP program parameters
– All SET MENU items except MEMORY GUARD
– All speaker levels
– The on-screen display (OSD) mode
• Select OFF to deactivate the memory guard feature.
Notes
• When MEMORY GUARD is set to ON, you cannot use the test
tone or select any other SET MENU items.
• When MEMORY GUARD is set to ON, "MEMORY
GUARD!" appears in the OSD and in the front panel display
when you try to adjust the protected system parameters.
84
OFF
■ Audio select
C)AUDIO SELECT
Use this feature to designate the default input mode for the
input sources connected to the DIGITAL INPUT jacks
when you turn on the power of this unit.
Choices: AUTO, LAST
C)AUDIO SELECT
[AUTO
[<]/[>]:Adjust
• Select AUTO if you want this unit to automatically
detect the type of input signals and select the
appropriate input mode.
• Select LAST if you want this unit to automatically
select the last input mode used for the connected input
source.
Note
Selecting LAST does not recall the last setting for the EXTD
SUR. button.
■ Decoder mode
Use this feature to designate the default decoder mode for
the input sources connected to the DIGITAL INPUT jacks
when you turn on the power of this unit. See page 41 for
details about the input mode.
Choices: AUTO, LAST
D)DECODER MODE
[AUTO
[<]/[>]:Adjust
• Select AUTO to if you want this unit to automatically
detect the type of input signals and select the
appropriate decoder mode.
• Select LAST to if you want this unit to automatically
select the last decoder mode used for the connected
input source.
Note
Selecting LAST does not recall the last setting for the EXTD
SUR. button.
LAST
D)DECODER MODE
LAST