Clearing A Learned Function - Yamaha HTR-5990 Owner's Manual

REMOTE CONTROL FEATURES
5
Release the object used to press CLEAR to
exit from the clearing mode.
CLEAR
Notes
• C;NG appears in the display window if clearing was
unsuccessful. In this case start over from step 3.
• ERROR appears in the display window if you press a button not
indicated in the respective step, or if you press more than one
button simultaneously.

■ Clearing a learned function

You can clear the function learned for a certain button in
each control area.
1
Set AMP/SOURCE/TV to SOURCE.
AMP
SOURCE
TV
2
Press an input selector button to select the
source component containing the function
you want to clear.
The selected component name appears in the display
window.
(U.S.A. model)
XM
A AUDIO SEL SLEEP
PHONO TUNER CD MULTI CH IN
V - AUX
CBL/SAT MD/TAPE CD-R
DTV VCR 1 DVR/VCR2 DVD
3
Press LEARN using a ballpoint pen or similar
object.
LEARN and the selected component name
(ex. DVD) appear alternately in the display window.
LEARN
Notes
• Do not press and hold LEARN. If you hold it down for
more than 3 seconds, the remote control enters the remote
control code setting mode.
• If you do not complete each of the following steps within
30 seconds, the learning mode will be automatically
canceled. In this case, press LEARN again.
100
4
Press and hold CLEAR using a ballpoint pen
or similar object and then press the button
you want to clear for about 3 seconds.
C;OK appears in the display window if clearing was
successful.
(U.S.A. model)
FREQ/RDS FREQ/RDS EON EON MODE PTY SEEK MODE PTY SEEK START START
REC
DISC SKIP
OFF ON MACRO LEARN CLEAR RE–NAME
y
• If you continuously want to clear another function, repeat
step 4.
• If you continuously want to clear another function for
another component, press SELECT k / n to select the
component, then repeat step 4.
• Once you clear a learned function, the button reverts to the
factory setting (or to the manufacturer setting if you have
set remote control codes).
5
Release the object used to press CLEAR to
exit the clearing mode.
The remote control returns to the learning mode.
6
Press LEARN again to exit.
Notes
• C;NG appears in the display window if clearing was
unsuccessful. In this case, start over from step 4.
• ERROR appears in the display window if you press a button not
indicated in the respective step, or if you press more than one
button simultaneously.