Two Touch Memory; Troubleshooting; Maintenance - Swisscom Top C44 Instruction For Users

Two Touch Memory

There are 10 Two Touch memories in this designer's phone.
Follow the instructions listed below to store a number into the Two Touch Memory bank:-
1. Lift the handset or press (SPEAKER) button.
2. Push (STORE) button and a icon will show on the display.
3. Enter the phone number for the entry.
4. Push (STORE) button again followed by a desired memory bank from 0 to 9.
5. Replace the handset.
T o make a call with Two T ouch memory, simply pick up the handset or press
and wait for dialling tone, push (MEMORY) followed by a desired memory bank location from
0 to 9. And, the store phone number sequence will be shown on the display and dailled out
automatically.

Maintenance

1. Do not expose this product to dust, strong sunlight, humidity, high temperature, or mechanical
shock.
2. Do not use corrosive or abrasive cleansers on this product. Keep the unit dust free by wiping
it with a soft, dry cloth.
3. Do not disassemble this product, it contains no user-serviceable parts.
4. In case of a thunderstorm, it is advised to disconnect the designer's phone, as product warranty
does not cover damage caused by lightning / serge.
7
Trouble Shooting
Q1. My phone does not work!
A1. Make sure all connection of coil cord and line cord are connected securely to the jacks.
A1. Push the hook switch once and wait for dialling tone again.
A1. If you have connected more than one phone to the same telephone line, make sure all other
telephones connected are put on-hook. In some telephone systems, when the first phone on
the same telephone line is used, all other telephones are electrically disconnected.
A1. Try to connect another telephone to the telephone socket, if the problem persists, it appears
that there is a problem with your telephone line system, consult your network provider.
A1. If the person of the other end of the conversation does not hear your voice, make sure you
have not pressed the
Q2. My phone does not ring!
(SPEAKER)
A2. Check if the ringer switch is on the OFF (
switch is on the OFF (
HIGH (
A2. Make sure the connection of line cord are connected securely to the jacks.
Q3. The memory buttons do not work as expected!
A3. Make sure you do not enter telephone number longer than limits mentioned in the memory
buttons section.
A3. If your phone is connected behind a PABX system, consult your system provider for information
of timed pause delay required to make an external call.
(MUTE) button.
) position. Your phone will not ring if the ringer
) position. Change the position of ringer switch to LOW (
).
GB
) or
8