Function Description - Swisscom Top C44 Instruction For Users

Function Description

Information on the Display
Function Buttons
To enter the digits 0-9
To enter
To enter
One touch memory (20 digits maximum). A single push on those buttons
to make calls with stored telephone numbers. Please refer to instruction
for users, section "One Touch Memory".
To set current time to the clock.
(SET)
This button functions as STORE when programming a telephone number
into a memory bank. Please refer to memory programming sections for
(STORE)
details.
To view the last dialled number and its call duration.
(VIEW)
Two Touch Memory (20 digits maximum).10 Two Touch Memory banks
can be accessed via this button. Please refer to instruction for users,
(MEMORY)
section "Two Touch Memory".
This button functions as "MUTE" during conversation. Press and hold this
button and your voice will not pass through the microphone. To resume,
(MUTE)
release the button.
3
Description
Function Buttons
Flash or Recall
To switch between 2 lines.
(RECALL/FLASH)
This button functions as "last number redial" when making a call (32 digits
maximum). Called number longer than 32 digits will not be kept in redial
(REDIAL/P) memory.
This button functions as "pause" when programming a telephone number
into a memory bank.
To put your phone off-hook for on-hook dialling. To switch back, simply
pick up the headset and speak as normal.
(SPEAKER)
To select ringer level (off/ low/ high).
When a headset (purchased separately) is connected to the headset jack,
conversation can be made via a headset.
(OPTIONAL)
Description
GB
4