Advertisement
Please check that you received allofthe following parts.
Remote control
Batteries
(2)
(AA, R06, Ui-3)
OOOO
_o
oooQ
@¥AMAB_
AM loop antenna
Indoor FM antenna
Press the _
part and slide the battery
compartment
cover off.
Insert
two supplied
batteries
(AA,
R06,
UM-3)
according
to the polarity
markings
(+ / -) on the inside
of the battery
compartment.
3
Slide the cover back until it snaps into place.
Notes on batteries
• Change all of the batteries if yon notice the following
conditions: the operation range of the remnte control decreases.
the indicator does not flash or its light becomes dim.
• Do not use old batteries together with new ones.
• Do not use different tTpes of batteries (such as alkaline and
manganese batteries) together. Read the packaging carefully as
these different t}_pes of batteries may have the same shape and
color.
• If the batteries have leaked, dispose of them imlnediatel?q Avoid
touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly before
installing new batteries.
• Do not throw away batteries with general house waste: dispose
of them correctly in accordance with yonr local regulations.
If the remote
control is without
batteries
for more than
2 minutes,
or if exhausted
batteries
remain
in the
remote
control,
the contents
of the memory
may be
cleared.
When the memory
is cleared,
insert new
batteries,
set up the remote
control
code and program
any acquired
functions
that may have been cleared.
3
Advertisement
