Advertisement
The basic setup feature
is a useful way to set up your
system quickly
and with minimal
effort.
Y
• If you wish to confi_lre the unit manually using more precise
acliustments, use the detailed parameters in SOUND MENU
(page 55) instead of using BASIC SETUP.
• Altering any parameters in BASIC? SETUP will reset all
parameters in SOUND MENU.
• Initial settings are indicated in bold lbr each parameter.
Before
you begin:
•
Press SPEAKERS
A or B on the fi'ont panel (or press
AMP to select the AMP mode, then press SPEAKERS
A or B on the remote
control)
to select the front
speakers
you want to use.
•
Make sure you disconnect
your headphones
fi'om this
unit.
1
Press AMP.
Press ENTER to enter BASIC SETUP.
The ROOM parameter appears in the front panel
display.
Pressj
/ i to select
the desired
setting.
ROOM: S M >L
Select the size of the room you have installed
your
speakers
in. In general,
the room sizes are defined
as
follows:
[U.S.A. and Canada models]
S (small)
16 x 13ft, 200fl 2 (4.8 x 4.0m, 20m 2)
M (medium)
20 x 16ft, 300fl2 (6.3 x 5.0m, 30m2)
L (large)
26 x 19ft, 450fl2 (7.9 x 5.8m, 45m2)
[Other models]
S (small)
3.6 x 2.8m, 10m2
M (medium)
4.8 x 4.0m, 20m2
k (large)
6.3 x 5.0m, 30m 2
Press d to display the SUBWOOFER
parameter.
Press SET MENU.
"BASIC SETUP" appears in the front panel display.
aETM[[_
_
-_
BASIC
SETUP
Pressj
/ i to select
the desired
setting.
SUBWOOFER"YES
YES
If yon have a subwoofer in your system.
NON K
If you do not have a snbwoofer in yonr system.
21
Advertisement
