Advertisement
[_aY#H£oTJ,'l
Do not connect
this unit or other components
to the mains
power
until all connections
between
components
are
complete.
•
Cable indications
For analog signals
left analog cables
right analog cables
For digital signals
optical cables
coaxialcables
For video signals
video cables
component
video cables
•
Analog jacks
You can input analog signals
fi'om audio components
by
connecting
audio pin cable to the analog jacks on this unit.
Connect
red plugs to the right jacks and white plugs to the
left jacks.
•
Digital jacks
This unit has digital jacks
lbr direct transmission
of digital
signals
through
either coaxial
or fiber optic cables.
You
can use the digital jacks
to input PCM, Dolby
Digital
and
DTS bitstreams.
When you connect
components
to both
the COAXIAL
and OPTICAL
jacks,
priority
is given to
the input signals
fi'om the COAXIAL
jack. All digital
input jacks
are compatible
with 96-kHz
sampling
digital
signals.
This unit handles digital and analog signals independently.
Thus
audio signals input to the analog jacks are only output to the
analog OUT (REC)jacks.
Dust
protection
cap
Pull out the cap fi'om the optical jack before you connect
the fiber optic cable. Do not discard the cap. When you are
not using the optical jack, be sure to put the cap back in
place.
This cap protects
the jack from dust.
•
Video jacks
This unit has two types of video jacks. Connection
depends on the availability of input jacks on your monitor.
COMPONENTVK_EO
WDEO
pR
PB
Y
@
@@@
VIDEO jacks
For conventional composite video signals.
COMPONENT VIDEO jacks
For component signals, separated into luminance (Y) and
color difference (PB, PR) to provide the best quality in
picture reproduction.
Signal flow inside this unit
Input
V_DEO
Output
(MONITOR OUT)
VIDEO
14
Advertisement
