Advertisement
• When playing a DTS-CDiLD.
be sure to set the INPUT MODE
to DTS.
• If the digital output data of the player has been processed in an?"
wa3: you may not be able to perfom_ DTS decoding even if you
make a digital connection between this unit and the player
depending on the player.
•
Displaying information about the input
source
You can display
the type, fomlat
and sampling
frequency
of the current
input signal.
1
Select the input source.
Press AMP to select the AMP mode, then
press STRAIGHT so that "STRAIGHT"
appears in the display.
STP_IGHT
then
%
}
STRAI GHT
WWil'dqiI'ti
3
Press u / d to display the following
information about the input signal.
(Format)
rate
Jig
Signal
format display.
When the unit
cannot
detect a digital signal it
automatically
switches
to analog input.
Number
of source
channels
in the input
signal.
For example,
a multi-channel
soundtrack
with 3 front channels,
2
sun'ound
channels
and LFE, is
displayed
as "3i2iLFE".
Sampling
frequency.
When the unit is
unable
to detect the sampling
fi'equency
"Unknown"
appears.
Bit rate. When the unit is unable to
detect the bit rate "Unknown"
appears.
Flag data encoded
with DTS or Dolby
Digital
signals
that cue this unit to
automatically
switch decoders.
31
Advertisement
