Advertisement
li'lA*d%|'tl
• Some 6.l-channel
compatible discs do not have the flag of a
6. l-channel signal which this trait can automatically
detect. To
ellioy these kinds of discs with the extended surronnd mode.
select "MATRIX".
• The extended surround mode is not available in the ±bllowing
cases:
When "SUR. LR" (see page 55) is set to NONE.
When the source colmected to the MULTI CH INPUT jack is
being played.
When the source being played does not contain surround left
and right channel signals.
When a Dolby Digital KARAOKE sottrce is being played.
When "2ch Stereo" or "Direct Stereo" is selected.
When "AIrTO" is selected while using STRAIGHT or one of
the SUR. STANDARD programs.
• When the power of this unit is turned off. this setting will be
reset to "AUTO".
•
Enjoying 2-channel software in surround
Signals
input from 2-channel
sources
can also be played
back on nmltiple
channels.
Press
AMP to select
the AMP mode,
then press
STANDARD
on the remote
control
to switch
between
the SUR. STANDARD
and SUR.
ENHANCED
programs.
STANDARD
Or press MOVIE to select the MOVIE THEATER
program.
MOVIE
When you select the SUR. STANDARD program:
PRO LOGI C
Dolby Pro Logic processing for any sources.
PLII
Movie
Dolby Pro Logic II processing for movie software.
PLII
Music
Dolby Pro Logic II processing for music software.
PLI I Game
Dolby Pro Logic II processing for game software.
Neo:6
Cinema
DTS processing tbr movie software.
Neo:6
Music
DTS processing for music software.
When you select the SUN. ENHANCED or MOVIE
THEATER program:
PRO LOGI C
Dolby Pro Logic processing for any sources.
PLII
Movie
Dolby Pro Logic II processing for movie software.
Neo:6
Cinema
DTS processing for movie software.
5/
You can also select a decoder by pressing.j / i on the remote
control when the decoder type is displayed in the front panel
display.
Press SELECT on the remote control to select
the decoder.
SELECT
You can select from the following
modes
depending
on
the type of software
you are playing
and your personal
preference.
28
Advertisement
