Advertisement
|*_'li'li't_*lIPh'_
•
Connecting the AC power cord
Plug the power
cord into an AC wall outlet.
•
AC
OUTLET(S) (SWITCHED)
....... 2 outlets
Use these outlets to connect
the power
cords from your
other components
to this unit. Power to the AC
OUTLET(S)
is controlled
by this unit's STANDBY/ON
(or SYSTEM
POWER
and STANDBY).
The outlet(s)
supply power
to any connected
component
whenever
this
unit is turned on. The maximum
power
(total power
consumption
of components)
that can be connected
to the
AC OUTLET(S)
is 100 W.
•
Memory back-up
The memory
back-up
circuit prevents
the stored data from
being
lost even if this unit is in the standby
mode.
However
if the power
cord is disconnected
from the AC
wall outlet, or the power
supply is cut for more than one
week,
the stored data will be lost.
When all connections
are complete,
turn on the power
of
this unit.
(U.S.A.
model)
STANDBY/ON
POWER
Press STANDBY/ON (or SYSTEM POWER on the
remote control) to turn on the power of this unit.
POWER_
or
Front panel
Remote
control
20
Advertisement
