Download Print this page

Yamaha HTR-5835 Owner's Manual page 29

Yamaha stereo receiver user manual
Hide thumbs Also See for YAMAHA HTR-5835:

Advertisement

Select
a sound
field
program
if desired.
Press PROGRAM
I
h repeatedly
(or press AMP
to select the AMP mode,
then press one of the sound
field program
buttons
on the remote
control)
to select
a sound field progrmn.
(See page 48 for details
about
sound field programs.)
Front panel
or
',AM_
Remote
control
To listen with headphones
("SILENT
CINEMA")
"SILENT CINEMA" allows you to enjoy multi-channel
music or movie sound, including Dolby Digital and DTS
surround, through ordinal 7 headphones. "SILENT
CINEMA" activates automatically whenever you connect
headphones to the PHONES jack while listening to
CINEMA DSP or HiFi DSP sound field programs. When
activated, the "SILENT CINEMA" indicator lights up in
the l}ont panel display.
• This unit will not be set to "SILENT CINEMA"
when MULTI
CH INPUT is selected as the input source.
• "SILENT CINEMA" is not effective when the Direct Stereo or
2ch Stereo program is selected, or in STRAIGHT mode.
.iwdrP%l, t l
To adjust the tone
You can adjust the tonal quality
of your front left and right
speakers
or headphones
(when
connected).
Press TONE
CONTROL
on the
fi'ont panel repeatedly
to select
TREBLE
or BASS,
then press
BASS/TREBLE
_+ repeatedly
to increase
or decrease.
Select TREBLE
to adjust the
high frequency
response.
TONE CONXaOL
Select BASS to adjust the low l'requeney
response.
Y
Speaker and headphone ac[iustmentsare stored independemly.
• If you increase or decrease the high-frequency
or low-frequency
sound to an extreme level, the tonal quality of the surrotmd
speakers may not match that of the front left and right speakers.
• TONE CONTROL is not effective with the Direct Stereo
progam
(page 29) or MULTI CH INPUT.
• \_]len TC. BYPASS is set to AUTO (page 57), and BASS and
TREBLE are set to 0 dB, audio output automatically bypasses
this unit's tone control circuitry.
To mute the sound
Press MUTE on the remote control.
The MUTE indicator flashes in the
fi'ont panel display.
To resume the audio output, press
MUTE again (or press VOLUME
/+).
The MUTE indicator disappears from
the display.
Y
You can adiust the mnting level (see page 57).
25

Advertisement

loading