Tuning Operations; Automatic Tuning; Manual Tuning - Yamaha RX-V2092 Owner's Manual

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is possible.
However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).

AUTOMATIC TUNING

1. Select "TUNER" as the input source.
Front panel
TUNER PHONO
2. Select the reception band (FM or AM) confirming it on the
display panel.
Front panel
FM/AM
3. If "AUTO TUNING" is not illuminated on the display panel, press once
so that it lights up.
Front panel
AUTO/MAN'L MONO
TUNING
MODE
4. Begin the automatic tuning search.
To tune to a higher frequency, press the right side once.
To tune to a lower frequency, press the left side once.
• If the station where tuning search stops is not the desired one,
press again.
• If the tuning search does not stop at the desired station
(because the signals of the station are weak), change to the
MANUAL TUNING method.
50

TUNING OPERATIONS

Remote control
TUNER
or
FM or AM
or
AUTO TUNING
Front panel
DOWN TUNING UP

MANUAL TUNING

1. Select "TUNER" as the input source.
Front panel
TUNER PHONO
2. Select the reception band (FM or AM) confirming it on the
display panel.
Front panel
FM/AM
3. If "AUTO TUNING" is illuminated on the display panel, press once so
that it goes off.
Front panel
AUTO/MAN'L MONO
4. Tune to a desired station manually.
To continue tuning search, press and hold the button.
Front panel
DOWN TUNING
NOTE
If you tune to an FM station manually, it is received in monaural
mode automatically to increase the signal quality.
Remote control
TUNER
or
FM or AM
or
TUNING
MODE
UP