CONNECTING AND CONTROLLING ROOM 2 EQUIPMENT
You can make up a multi-room audio/video system with this
unit. In this system, this unit and Yamaha audio/video units
connected to this unit in the main room can be controlled by using
the provided Room 2 remote control unit from the second room so
that this unit sends audio and video signals (different from ones
selected in the main room) to the amplifier, monitor TV, etc. in the
To use the multi-room functions of this unit, you need the
following additional optional products:
An infrared signal receiver for the second room
An infrared emitter in the main room
This emitter transmits the infrared signals from the Room 2
remote control unit in the second room to the other components
in the main room (for example, CD player or LD player).
An amplifier and speakers for the second room
A video monitor for the second room
Since there are so many ways to connect and use this unit in a
multi-room installation, we recommend that you consult with a
custom installation specialist for the Room 2 connections which
will best meet your requirements.
:Some Yamaha models are able to connect directly to this unit
via the REMOTE CONTROL OUT jacks. If you own these
products, the use of an infrared emitter may not be necessary.
A Sample of system configuration and connections
LD player etc.
Room 2 remote
Infrared signal receiver