Page 2
Congratulations on your latest Target purchase. Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time.
Page 3
table of contents introduction hardware parts list how to use the cam lock system assembly 7-13 QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.
Page 4
hardware (H1) x 20 (H2) x 16 (H3) x 16 (H4) x 8 (H5) x 2 wooden dowel cam bolt long flat-head screw knob (H10) x 1 (H6) x 2 (H7) x 2 (H8) x 2 (H9) x 2 15mm pan-head screw knob bolt small cam long pan-head screw...
Page 5
exploded diagram ITEM DESCRIPTION QUANTITY top panel left side assembly right side assembly bottom frame back panel bottom back stretcher drawer face side drawer left side drawer right side drawer back side drawer bottom panel drawer bottom support...
Page 6
how to use the cam lock system Screw cam bolt into panel Align cam bolt(s) with cam(s) Push cam into panel - arrow feature and insert all the way into on cam top points to panel edge cross-bored hole(s) Rotate cam(s) clockwise 180° to Panels should be tight against each lock panels together other and connection should be rigid...
Page 7
step 1: attach bottom frame to back panel (H1) x 2 (H2) x 2 (H3) x 2 wooden dowel cam bolt 1.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out. 1.2. Screw-In cam bolts must be screwed down flush. 1.3.
Page 8
step 2: attach right side assembly and bottom back stretcher (H1) x 4 (H2) x 4 (H3) x 4 (H8) x 1 wooden dowel cam bolt long pan-head screw 2.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out. 2.2.
Page 9
step 3: attach left side assembly (H1) x 4 (H2) x 4 (H3) x 4 (H8) x 1 wooden dowel cam bolt long pan-head screw 3.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out. 3.2.
Page 10
step 4: attach top panel (H1) x 6 (H2) x 6 (H3) x 6 wooden dowel cam bolt 4.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out. 4.2.
Page 11
step 5: assemble drawer starting with drawer sides / finish assembly with back panel arrowed sticker will point to the back side of drawer face. (H1) x 4 (H4) x 8 (H7) x 2 (H9) x 2 wooden dowel long flat- small cam small cam bolt head screw...
Page 12
step 6: attach knobs and install drawer (H5) x 2 (H6) x 2 knob knob bolt 6.1. Do not over tighten screws.
Page 13
step 7: install anti-tip kit (H12) (H11) Position against wall Position against wall (H14) Mark position of strap hole on wall Mark position of strap hole on wall (H10) Drill 1/4” hole Drill 1/4” hole Tap in wall anchor Tap in wall anchor (H13) Fasten anti-tip strap with wall screw Fasten anti-tip strap with wall screw...
Page 14
1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury. 2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed. QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service.
Need help?
Do you have a question about the Windham Desk WNDESKXXBK and is the answer not in the manual?
Questions and answers