Advertisement
f) Exit the Data Logging page by clicking on the "OK" button.
Note: Depending on the USB flash memory speed, the USB drive might not
be ready yet and in this case the "USB not ready" notice is displayed.
Wait few seconds until this notice disappears.
g) The "Save.." button converts now in a green character
"START" button.
Touch
h) During data logging a timer shows the elapsed time if the
selected acquisition mode is Manual or the time left if the
selected acquisition mode is Timed.
During data logging the "START" button converts now in a
yellow character "STOP" button.
Touch
Note: Data are saved in the USB memory folder X:\PLUS2\"head serial number"\
Values and statistics are saved in separate files named as follows:
"DATA_nnn.txt" for values
"STAT_nnn.txt" for statistics
2.14. T
"M
HE
ENU
a) Touch the "Menu" button
b) The first two lines Date and Time settings are self-explicative.
Language and Display Colour choices (not yet available).
For energy saving purpose, when Plus 2 is powered by battery,
both the screen and the whole instrument turn off after a certain
period of time of instrument inactivity; these two off times can be
controlled via "Menu" interactive window.
c) Display off: after a certain time of Plus 2 inactivity the display
turns off showing a stand-by notice only. Selecting ON/OFF
activate/deactivate this feature; if ON has been selected,
Display off time can be set from 1 to 30 minutes. Touching the
screen when Plus2 is in stand-by mode recovers immediately
the instrument display operation.
Laserpoint s.r.l. - Plus 2 - Quick Start Guide - All Rights Reserved
to begin the data logging.
to stop the data logging.
" B
UTTON
to open the Menu window.
Figure 16 and 17
Figure 18
8
Advertisement
