Advertisement
2.12. M
EASUREMENT STATISTICAL ELABORATION SETTING
a) Touch the Statistics screen button
make Statistics window appear (Figure 13).
b)
Select one of the Four processing options
Off: no statistics.
Continuous:
continuous data collection basis.
Repeated: the data are repeatedly collected and elaborated
within a user's defined time period.
Single: the data are collected and elaborated only once
within a user's defined time period.
c) Press the "Reset" button to confirm the selection.
2.13. D
ATA LOGGING TO A
a) Insert the USB memory key into the dedicated port on
Plus 2 left side.
b) Touch the "Save..." screen button
Data Logging window.
c) Select the desired data to be saved: values, statistics or both.
d) Select a Sample Rate value between 0.5 s and 99 s.
Note: The sample rate value refers to Values and Statistics data when
Continuous statistics is selected or to Values data only when Single or
Repeated statistics are selected, as in these cases Statistics data are
saved each time they are refreshed.
e) Select the acquisition mode:
-
Manual acquisition: check this box to start and stop the acquisition manually.
-
Timed acquisition: de-select the "Manual acquisition" box and input the desired time
acquisition value to define when the data acquisition has to be stopped.
Laserpoint s.r.l. - Plus 2 - Quick Start Guide - All Rights Reserved
the data elaboration is carried out on a
USB
MEMORY STICK
on Plus 2 display to
are available:
to open the
Figure 13
Figure 14
Figure 15
7
Advertisement
