Table of Contents
Advertisement
Quick Links
WARNING! The user of this instrument must be trained to the
use of power lasers and associated risks. LaserPoint is in no way
liable for any damage resulting from improper, careless or above
rated limits use of this instrument.
www.laser2000.com
F
i
F
i
Instruction Manual
(Rev11- Nov 2008;
GER/AT/CH
NoRdiCs
Laser 2000 GmbH
Laser 2000 GmbH
82234 Wessling
SE-112 51 Stockholm
Tel. +49 8153 405-0
Tel: +46 8 555 36 235
info@laser2000.de
info@laser2000.se
www.laser2000.de
www.laser2000.se
t
t
)
Firm. vers.11
FRANCE
Laser 2000 SAS
33600 Pessac
Tel. +33 5 57 10 92 80
info@laser2000.fr
www.laser2000.fr
ibERiA
Laser 2000 SAS
28034 Madrid
Cell +34 650 529 806
info@laser2000.es
www.laser2000.es
1
Advertisement
Table of Contents
Related Manuals for LaserPoint Fit
Summary of Contents for LaserPoint Fit
- Page 1 Firm. vers.11 WARNING! The user of this instrument must be trained to the use of power lasers and associated risks. LaserPoint is in no way liable for any damage resulting from improper, careless or above rated limits use of this instrument.
-
Page 2: Declaration Of Conformity
The EMC Directive 73/23/EEC Low Voltage Directive Manufacturer’s Name : LaserPoint srl. Manufacturer’s Address : LaserPoint srl- Via Burona, 51- Vimodrone-20090 Italy Type of Equipment: Laser Power/Energy Meter Model No.: Year of test & manufacture: 2004 Standard(s) to which Conformity is Declared:... - Page 3 Reference Power :________________W Measured Power: _________________W LaserPoint certifies that, at the time of calibration, the above listed instrument meets or exceeds all technical specifications defined at page 8 of this Instruction Manual. The above listed instrument has been calibrated using standard references traceable to the National Institute of Standards and Technology (NIST) or Physikalisch Technische Bundesanstalt (PTB).
-
Page 4: Starting The Instrument
2-Starting the Instrument To switch on the instrument, keep the ON/Zero button pushed until the LCD shows the Fit Model (Fit 50, Fit 200, Fit 500 shown in 2 steps), then release it (this step takes approximately 2 seconds). The instrument will also display one of the 2 available laser wavelengths: e.g. -
Page 5: Measurement Cycle
Approximately after 10 seconds the LED automatic shuts off. The FIT performs an automatic Zero and the LED turns steady green. The LCD shows the last measured power value . - Page 6 9-Out of Range Notice When the head is exposed to a source exceeding its full scale, the LCD shows four short lines instead of a numeric value. 10-Wavelength Selection To select the wavelength of operation (e.g. from CO2 to YAG), go back to Paragraph 2 (shut the instrument off), but keep the ON/Zero button pushed until the wavelength change appears on the display (this step takes approximately 7 seconds).
- Page 7 The symbol apply to all LaserPoint electronic products placed on the European Market after August 13, 2005. LaserPoint will affix the wheeled bin symbol with a bar to appropriate products. The bar indicates that the product was placed on the market after August 13, 2005.
-
Page 8: Technical Specifications
Technical Specifications Parameter Fit 50 Fit 200 Fit 500 Maximum Measurable Power (W) Minimum Measurable Power @ ±3% Accuracy (W) Absolute Minimum Measurable Power (W) 1.25 Maximum Laser Beam Diameter (mm) Power density damage threshold @ full scale at YAG...