Advertisement
3. P
2 S
LUS
PECIFICATIONS
Detector Compatibility
Input ranges
A to D Sampling rate
A to D resolution
Electrical accuracy
Electrical input noise level
Dynamic range
Analog output
Analog output accuracy
Dimensions
Weight
Display
Display digit height
Bargraph segments
Battery
Battery charge time
Battery run time
Supplied Battery Charger
Laserpoint s.r.l. - Plus 2 - Quick Start Guide - All Rights Reserved
:
Laserpoint Thermopile, Photodiode and OEM heads
7 mV – 700mV full scale, in 9 ranges
64 Hz
23 bit ADC resolution, 16bit processing resolution
± 0.5%
500nV
Input Offset Voltage drift (typical): -4nV/°C
8 decades
0.025 - 2 Volt, with 16-bit (0.0015% resolution.)
±0.1% ±2mV relative to display
170H x 100W x 36-50D (mm)
380 g
4.3" TFT LCD high brightness, 480 x 272 resolution,
resistive touch panel (96H x 55W mm).
15mm - 25mm Full Screen
250 pixel width
Built in rechargeable Li-Pol. 3.7V 3700mAh
7-8 hours if not working
15-20 hours if working
> 9 hours in normal operation
> 15 hours in stand-by display mode
Input 100/240Vac 50/60Hz Out 5Vdc 1A,
Charging current is 0.5A (Plus 2 may be charged
through a PC USB port).
10
Advertisement
