Table of Contents
Advertisement
Other Equipment
There are several required items not included in your device kit that you need to operate the
NI 5668R. Your application may require additional items not included in your kit to install or
operate your device.
•
A PXI Express chassis and chassis documentation. The NI PXIe-1085 chassis is one
available option for your device. For more information about compatible chassis options,
refer to ni.com.
•
An embedded controller or MXI controller system that meets the system requirements
specified in this guide and chassis documentation.
Preparing the Environment
Ensure that the environment you are using the NI 5668R in meets the following specifications.
Operating ambient temperature
(IEC 60068-2-1, IEC 60068-2-2)
Operating relative humidity
(IEC 60068-2-56)
Maximum altitude
Pollution Degree
Indoor use only.
Caution
sure that the hardware is completely dry and free from contaminants before
returning it to service.
Note
Refer to the NI PXIe-5668R Specifications at
specifications.
Choosing and Installing the Software
Software Options
NI provides several software options for the NI 5668R—NI-RFmx, the NI-RFSA instrument
driver software, and the NI-RFSA Soft Front Panel (SFP).
Clean the hardware with a soft, nonmetallic brush or lint free cloth. Make
NI PXIe-5668R Getting Started Guide | © National Instruments | 5
0 °C to 55 °C
10% to 90%, noncondensing
2,000 m (800 mbar) (at 25 °C ambient
temperature)
2
ni.com/manuals
for complete
Advertisement
Table of Contents
