H3C WX1800H Series Installation Manual page 50

7
Appendix C Optional transceiver
modules
Transceiver module, fiber connector, and optical
fiber views
The WX1840H access controller provides SFP ports. To connect a SFP port on the device, use an
SFP transceiver module and an optical fiber with LC connectors.
Figure7-1 SFP transceiver module
Figure7-2 Optical fiber with LC connectors
(1) LC connector
Transceiver module specifications
The transceiver modules that have MM and SM in their names support multi-mode optical fibers and
single-mode optical fibers, respectively.
The SFP ports on the WX1840H access controller support the following transceiver modules:
•
SFP-GE-LX-SM1310-A (seeTable7-1)
•
SFP-GE-SX-MM850-A (see Table7-2)
(2) Optical fiber
1