Wx1840H; Interface Numbering; Wx1804H-Pwr; Wx1810H-Pwr - H3C WX1800H Series Installation Manual

WX1840H

Figure5-7 Front panel
(1) 100/1000BASE-T autosensing Ethernet copper ports (WAN 1, WAN2, and LAN1 to LAN6)
(2) 1000BASE-X SFP port 5 and 6
(4) SD card slot
Figure5-8 Rear panel
(1) AC power receptacle

Interface numbering

WX1804H-PWR

Fixed ports on a WX1804H-PWR access controller are numbered as follows:
•
100/1000BASE-T autosensing Ethernet copper port WAN is represented by interface number
GigabitEthernet 1/0/1.
•
100/1000BASE-T-PoE+ autosensing Ethernet copper ports LAN1 through LAN4 are
represented by interface numbers GigabitEthernet 1/0/2 through GigabitEthernet 1/0/5,
respectively.

WX1810H-PWR

Fixed ports on a WX1810H-PWR access controller are numbered as follows:
•
100/1000BASE-T-PoE+ autosensing Ethernet copper ports LAN 1 through LAN 10 are
represented by interface numbers GigabitEthernet 1/0/1 through GigabitEthernet 1/0/10,
respectively.
•
100/1000BASE-T autosensing Ethernet copper ports WAN 11 and WAN 12 are represented by
interface numbers GigabitEthernet 1/0/11 and GigabitEthernet 1/0/12, respectively.
(3) USB port
(5) Console port (CONSOLE)
(2) Grounding screw
5-3